SAMi Camera Bracket / Stand Instructions

Written Instructions:

1. On the back of the bracket, there is a metal plate. Use a coin to loosen the ball joint.
   
   
2. Next, take the SAMi-3 Camera and affix the back of the camera to the ball joint on the bracket by placing the ball into the available joint on the back of the camera.
   
   
3. Hold the camera with the ball in the joint and use the knob at the end of the ball joint to line it up and twist it on. Note: if it does not turn easily, loosen the ball joint some more.
   
   
4. Aim the camera at the desired monitoring location and tighten the ball joint using a coin
   
   
5. You can adjust the camera angle at any time by gently loosening the ball joint.