SAMi Cord Extension Instructions

SAMi Cord Extension Instructions.

1. Plug the cord extension in the end of the AC adapter cord.
2. Wrap the end of the cord extension a couple times around the bracket to prevent the cord from pulling on the camera, then plug the end into the camera.
3. Use the included clips to route the cord along the wall, use one every couple feet.
4. First clean the surface with isopropyl rubbing alcohol.  Do not use household cleaners.  
5. Separate the strips and remove the blue liner.  Press the adhesive to a clip.
6. Remove the black liner and press on to the wall.  The clip opening should be facing up when running the cord horizontally and to the side when running vertically.  For best results alternate facing left and right when running up the wall.
7. Press and hold the clip for 30 seconds.  Maximum strength is reached after an hour.
8. To remove, Hold the clip gently.  Grasp tab and pull ALONG the wall, stretching the adhesive until it releases.

Do not chain more than two cord extensions.  Strangulation Hazard - do not install within reach of a baby.